LABDSTUDIOS
Sign in

DUD VC BLACKTOP v1

An unattended Blacktop VC loop for NBA 2K27, with a randomised input gap and an on-screen countdown.

What it does

Press d-pad down and it takes over. The script walks the menus, starts a Blacktop game, holds through the clock and calls the rematch, then repeats until you press the same button to stop it.

Roughly 1,000 VC an hour, unattended.

Why the timing varies

Every action is separated by a pause drawn fresh each cycle rather than a fixed interval, so no two runs produce the same input pattern. A loop that fires on exactly the same cadence forever is the easiest thing in the world to pick out.

Mods

  • One-button run

    D-pad down starts and stops the whole thing, with a rumble on each so you know it took without looking at the screen.

  • Automatic setup

    Walks the menus into a Blacktop game on its own, so starting a run does not mean driving the front end by hand first.

  • Adjustable hold

    Set how long it holds through the game with L2 or LT and up or down, from one to five minutes. The value saves on the device and survives a reboot.

  • Randomised gaps

    Every action is separated by a pause drawn fresh each time, so the input pattern is not identical run to run.

  • Countdown readout

    The OLED shows the phase and the time left on the current hold, so a glance tells you where the run is.

Sample

DUDVCBLACKTOPv1.gpcGPC
// The farm run is a small state machine. Every action waits out a gap drawn
// fresh from a tuned range, so two runs never share an input pattern.
//
// Values live in the build, not here. The hold length is set on the device
// with L2 or LT and up or down, and saves across reboots.

function arm_gap() {
    gap_ms = random(GAP_MIN, GAP_MAX);
}

function tick() {
    if (busy()) return;

    if (gap_ms > 0) {
        gap_ms -= dt;
        return;
    }

    if (step == STEP_HOLD) {
        set_val(PS4_SQUARE, PRESS);
        hold_ms += dt;
        if (hold_ms >= hold_time_ms) {
            hold_ms = 0;
            arm_gap();
            combo_run(ls_down_a);   // rematch
            step = STEP_DN2;
        }
        return;
    }

    ...
}

An excerpt. The shipped build exposes every value to the on-screen menu.

What you get

  • Single-key start and stop
  • On-screen phase and countdown
  • Randomised timing between inputs
  • Patch-tracking updates for the 2K27 cycle
  • Setup walkthrough

Install

  1. 01
    Update the device. Zen firmware 2.30 or newer, flashed from Zen Studio 2.30 or newer.
  2. 02
    Load the script. Open the .gpc in Zen Studio 2.30 or newer and compile it to a memory slot.
  3. 03
    Pair your controller. Connect through the adapter and confirm the slot is active.
  4. 04
    Calibrate. Open the on-screen menu and set your release window. Start from free throws, where the window stays static.